Guide

How to Use an Old-Fashioned Ice Cream Maker

Updated on · By the Frost Fire Fizz team

Here's how to use an old-fashioned ice cream maker: fill the chilled canister, layer ice and rock salt in the bucket, and let the motor churn until the mix thickens into soft serve. Then cure the batch in the freezer for a firmer scoop.

On this page (9 sections)
  1. What do you need before you start churning?
  2. How do you pack the ice and salt in the bucket?
  3. Which way do you turn the crank and when do you start?
  4. How do you know when the ice cream is done?
  5. Do you need to cure the ice cream after churning?
  6. What mix proportions and base recipes work best?
  7. What goes wrong, and how do you fix it?
  8. How do you clean and store the maker?
  9. The short version of how to use an old-fashioned ice cream maker

Here's how to use an old-fashioned ice cream maker: fill the chilled canister, layer ice and rock salt around it in the bucket, and let the motor turn the dasher until the mix thickens. Then cure the batch in the freezer for a firmer scoop.

The bucket style has not changed much in a century. The method is the same whether you are working with a wooden pail or an electric crank, so the order of steps matters more than the brand.

What do you need before you start churning?

You need a canister, a dasher and lid, ice, rock salt and a chilled base mix. The ice must be crushed or in small pieces so it packs tightly around the canister and melts evenly.

Chill the canister in the freezer before the mix goes in, and keep the base in the fridge until it is cold. A warm canister or a warm base slows the whole process and leaves you churning longer.

Crushed ice works better than big cubes. A food processor or a bag and a rolling pin does the job, and small pieces sit closer to the canister wall where the cold does its work.

Keep a towel and a shallow tray nearby. Condensation and salt water drip down the outside of the bucket, and a tray saves the countertop.

Our guide to the different types of ice cream makers covers the bucket style next to freezer-bowl and self-freezing machines if you are still choosing.

How do you pack the ice and salt in the bucket?

Pack the bucket in layers: a few inches of ice, a sprinkle of rock salt, then ice again until the ice sits level with the top of the canister. The salt lowers the melting point of the ice, and that colder brine is what freezes your mix.

A rough ratio of one part salt to six parts ice is a sensible starting point. More salt makes the brine colder but melts the ice faster, so you will be topping it up sooner.

Do not let salt fall into the canister or the mix. Wipe the rim of the canister before you put the lid on, and keep the layers outside it.

The Morton box is big enough for several batches and is meant for this job, not for the table.

Which way do you turn the crank and when do you start?

Start the motor or the crank before the ice is fully packed and keep it turning while you finish layering. A dasher that sits still while the mix chills can freeze into a block against the canister wall.

On a hand-crank model, turn steadily rather than in hard bursts. The mix thickens from the outside in, and even turning scrapes the frozen edges back into the middle.

On an electric model, switch it on once the canister is seated in the bucket. The motor handles the speed, and you only watch the ice level and the drip.

Check the level every 15 to 20 minutes. Add ice and a little salt as the top sinks, and keep the overflow clear so the brine does not spill back into the mix.

How long does an old-fashioned ice cream maker take?

Expect 20 to 40 minutes, depending on the base, the room and how cold your ice and salt are. Sunbeam says the 4-quart model takes 20 to 40 minutes.

A mix that is still slushy at the 30 minute mark usually needs more ice and salt, not more time. Top off the bucket and keep the dasher turning.

How do you know when the ice cream is done?

The batch is ready when the mix pulls away from the canister wall and holds a soft mound around the dasher. It will look like soft serve rather than the firm scoop you get from a shop.

Stop the motor as soon as the mix reaches that stage. Running it longer just works the ice cream and can make it greasy or grainy.

Lift the dasher out slowly and let it drain into the canister before you set it aside. That dripping mix is the cook's share and the best sign of whether the batch is where you want it.

If you want firmer ice cream, move straight to curing. The bucket cannot get the mix much colder than soft serve.

Do you need to cure the ice cream after churning?

Yes. Spoon the soft mix into a lidded container and freeze it for 2 to 4 hours to firm up.

This step, sometimes called curing, lets the ice cream set and the flavor settle.

Press a sheet of plastic wrap or baking paper onto the surface before the lid goes on. That keeps ice crystals from forming on top during the freeze.

Do not leave a metal dasher or canister in the freezer full of finished ice cream if you can transfer it. A plastic tub is easier to scoop from and takes less shelf space.

Our post on how to use an ice cream maker walks through the same curing step for other styles, and the principle carries over here.

What mix proportions and base recipes work best?

A reliable base is about 2 cups of dairy to 1 cup of sugar-sweetened flavoring, scaled to your canister size. More fat makes a richer, smoother churn, and less sugar keeps the mix from staying soft.

A simple vanilla base: 2 cups heavy cream, 1 cup whole milk, 3/4 cup sugar and a splash of vanilla. Whisk until the sugar dissolves and chill it before it goes in.

For fruit, cook berries down with a little sugar and cool them first. Fresh fruit straight from the fridge adds water and slows the freeze.

Follow your maker's fill line. A canister packed to the brim leaves no room for the mix to expand as it churns.

The Sunbeam manual includes recipes if you want a starting point, and the motorized crank does the stirring for you.

What goes wrong, and how do you fix it?

Most problems come from the ice and salt balance, the fill level or a mix that started too warm. Fix those three and the churn usually runs smoothly.

  • Mix won't freeze: add more crushed ice and a spoonful of salt, then keep turning.
  • Ice cream too hard or icy: the brine got too cold or the batch over-churned; cure less and stir in a little cream.
  • Motor strains or stalls: the mix is too thick or too full, so stop, scoop some out and restart.
  • Saltwater in the mix: the canister rim was wet or the lid sat crooked, so clean the rim and seat the lid firmly.

Never add warm mix to a bucket that is already packed with ice. Chill the base first and the freeze goes faster.

How do you clean and store the maker?

Wash the canister, dasher and lid by hand in warm soapy water, then dry them fully. These parts are hand wash only, and a dishwasher can warp a canister or dull the dasher.

Empty the bucket once the ice has melted, and rinse the wooden or plastic body. Dry the wood well before storage so it does not swell or crack.

Store the parts loosely rather than nesting the dasher hard against the canister. A dry, room-temperature shelf keeps the aluminum and the pine in good shape between batches.

Check the seal and the motor housing for salt residue after a party batch. A quick wipe now saves a stiff switch next summer.

If you are still shopping, our roundup of the best ice cream maker for home use puts the bucket style next to the freezer-bowl machines. For the bucket crowd, the best old fashioned ice cream maker picks out the motors worth the counter space.

The short version of how to use an old-fashioned ice cream maker

Use an old-fashioned ice cream maker by chilling the canister, layering crushed ice and rock salt around it, and letting the dasher turn until the mix holds a soft mound. Cure the batch in the freezer for 2 to 4 hours, then scoop.

Pick the Nostalgia if you want 6 quarts and a carrying handle for parties. Pick the Sunbeam if a pine bucket and a 4-quart batch suit your table.

Add a box of Morton salt and you have everything the bucket method needs.

Frequently asked questions

How much rock salt goes into the bucket?

Use roughly one part rock salt to six parts ice, layered as the bucket fills. Too little salt leaves the ice melting slowly and the mix soft, while too much speeds up melting so you need to top off sooner.

Can you start churning before the ice melts down?

Yes, start the motor as soon as the first ice and salt are in, then keep adding layers around it. The dasher needs to turn while the brine forms, or the mix can freeze unevenly against the canister wall.

Why is the ice cream too soft after churning?

Soft serve right out of the bucket is normal, because the salt-and-ice brine is not as cold as a freezer. Spoon it into a container and let it sit in the freezer for 2 to 4 hours to firm up.

Can you reuse the saltwater in the bucket?

Pour it out after each batch and start fresh. The brine is diluted and no longer cold enough to freeze a second batch quickly, and it is not meant for eating, so tip it away rather than saving it.